Power Query List.Accumulate – Unleashed

Following a reader’s request, today we will unleash the power of List.Accumulate.

The official documentation on List.Accumulate here was very confusing for me:

List.Accumulate(list as list, seed as any, accumulator as function)as any

Argument	Description
list	The List to check.
seed	The initial value seed.
accumulator	The value accumulator function.

OK. I understood the list argument quite right, but the other two arguments were post-nuclear-bomb science fiction.

So let’s try to understand the example that was used in the official page:

// This accumulates the sum of the numbers in the list provided.
List.Accumulate({1, 2, 3, 4, 5}, 0, (state, current) => state + current) equals 15

Oh, so the code above sums up all the elements in the list. That is nice. Let’s make sure the calculation was done right. 1+2+3+4+5 = 15. Yes, this is right 🙂

To prove that the code works, we can paste it to the Query Editor after creating a blank query:

But wait a minute, why should we bother using List.Accumulate when we can already sum up the numbers in a list using the function List.Sum?

So there must be something more powerful here… We will try to reveal it today and prove that List.Accumulate: More than meets the eye…

Before we start, let’s try to understand the seed and accumulator. In the example above, zero is used as the value for the seed argument, and a function that receives state and current is used as the accumulator.

The terms state and current can better help us to understand List.Accumulate.

The state is an object in Power Query which can be of any type. In our example it is a number. Defined as zero in its initial state (This is the seed, the initial state), and transformed on each iteration of the list. The value in state will increase by the number that is represented by current at each step (current represents the current element in the list). To make sure we understand this example, let’s review each step.

In the first step state is zero (as defined by the seed argument) and current is 1 (the first element in the list). During this step Power Query implements the function, and performs the sum operation state + current.

Iteration 1: state = 0, current = 1, Assign new value to state = state + current = 1

Iteration 1: state = 1, current = 2, Assign new value to state = state + current = 3

Iteration 1:state = 3, current = 3, …

state = 6, current = 4

state = 10, current = 5, Return state+current as the result = 15

 

Now that we better understand the flow, here are few important insights about List.Accumulate.

List.Accumulate(list as list, seed as any, accumulator as function)as any

You must use two-argument function as the accumulator.

The seed argument (or as we call it the initial state), should be of the same type as the first argument of your accumulator function and of the same type as of the function’s output.

Let’s try to demonstrate it with pseudo code:

myList = {... items of TYPE_X ...),
fnMyAccumulator = (state as TYPE_Y, current as TYPE_X) as TYPE_Y =>
   ...  ,
myAccumulatedResult = List.Accumulate(
    myList,
    some_initial_state_whose_type_is_Y,
    fnMyAccumulator)

So in the pseudo code above, myList is a list whose elements are of type TYPE_X (e.g. a record, list, number or text), and our initial state is of type TYPE_Y, we must define our accumulator function as a function that receives a state argument whose type is TYPE_Y and a current argument whose type is TYPE_X, and returns a value whose type is TYPE_Y.

If you are completely lost at this stage, that’s fine. Perhaps few examples will List.Accunmulate to sink in.

First exmaple – implementing List.Max

= List.Accumulate(
 {1, 2, 100, -40, 5},
 0,
 (max, current) =>
  if max < current then current else max)

This is still a basic example. We are warming up. This function will return the number 100 which is the maximal number in the list {1, 2, 100, 4, 5}.

But again, it is not so useful as we already have List.Max.

Let’s try to use List.Accumulate to calculate both the max and the min values on the same “pipeline”.

Here is the code:

= List.Accumulate(
 {1, 2, 100, -40, 4},
 [min=#infinity,max=-#infinity],
 (state, current) =>
 [min=if state[min] > current then current else state[min],
  max=if state[max] < current then current else state[max]]
),

The result is a record: [min=-40, max=100]

Let’s elaborate what we did here. Unlike the first example where we used a number as a state that will “remember” the maximal number in the list at each iteration, in this example we needed to “remember” two numbers as we go over the list. To pass two numbers as the state for List.Accumulate we defined a record whose keys are min and max. The accumulator function also calculates the new record of min and max according to the previous min and max and the current number in the list.

You can scale up and reuse the example above to perform multiple “online” calculations on your data with a single pass. Online means that you don’t require to store all the data to perform the calculation, and that you can gradually get your result by calculating an interim result at each step based on the previous results and the “online” data of the current step.

For example, in the code below we perform multiple calculations on the data which is serialized in myList. The calculations are performed at each step of the list iteration by the functions fnForResult1, fnForResult2, etc.

= List.Accumulate(
 myList,
 [min=#infinity,max=-#infinity],
 (state, current) =>
 [result1 = fnForResult1(current, state),
  result2 = fnForResult2(current, state),
  ...
  resultN = fnForResultN(current, state)]
}

An additional way to think about List.Accumulate is as a pipeline of machines that transform your data in a sequence of operations. Each machine in its turn, gets the data from its previous machine, transforms it, and passes it to the next machine in the pipeline. The definitions for each machine are serialized in the list, so each machine can be customized to perform a unique flavor of the same transformation. The processed data is initially defined as the seed argument, and it will “evolve” into the final product when the last machine will apply its transformation.

In conclusion, List.Accumulate is quite a powerful function in Power Query, and I hope that be now I motivated you to seek for interesting new scenarios to explore it.

Looking forward to hearing from you how you use List.Accumulate.